Набор плагинов для анализа, микширования и мастеринга: Visualizer VST, SEQ 1 and SEQ 2 Master Edition VST, Monofilter VST, Stereoizer VST, Stereoplacer VST, Line-up VST
Visualizer 1.9.4 If you find your production work can be slow and difficult, imprecise or arbitrary. Problems are difficult to track down and mixing can become a strange balance of guesswork and intuition, then you need some better tools.
SEQ 1 and SEQ 2 1.2.6 The NuGen Audio SEQ series, unlike many digital EQ’s, is linear phase. This means that the phase shift is linear across the frequency spectrum, resulting in a natural sounding EQ change, and producing minimal phase artifacts.
Traditional EQ algorithms employ a mathematical technique known as IIR (Infinite Impulse Response). Whilst this provides low CPU usage and is relatively simple from a mathematical point of view, there is an important side effect known as Phase Warping. Digital EQ utilising the classic the IIR approach distorts the relationship between frequency and phase.
The computational algorithm employed in SEQ1 is based up on FFT (Fast Fourier Transform Analysis). This is a much more involved process, involving transformation of the audio data into the frequency domain, before applying frequency related computations and then transforming back into the temporal domain. The advantage of this process is that the frequency and temporal relationship remains intact – linear phase transformation. The benefit of this method is that linear phase adjustments sound clearer, it is possible to create a much more transparent EQ using this technology. Phase Warping also affects the clarity of transients, as it causes Phase Smearing. Linear Phase calculations avoid this limitation, producing a sharper audio image.
Monofilter 4.0.5 New version! Used and trusted by producers the world over, MONOFILTER grabs hold of your bass and secures it solidly within your mix. Intuitive controls allow you to quickly anchor the power, whilst retaining the essential character and perceived spatial characteristics.
MONOFILTER brings back the centre of your bass, so easily lost through stereo effects processing, synth sound generation, unwanted phase inconsistencies and live recording mic. bleed. Our market leading features now give you clear control over stereo spread, transition and phase alignment, and the unique interface gives you clear and exacting visual feedback.
Stereoizer 3.1.7 New version! Stereoizer is a high-specification stereo image manipulation tool suitable for natural expansion, reduction and introduction of stereo width at any stage of the audio production process.
Developed for and tested by professional audio engineers, Stereoizer adds natural sounding width and depth to any audio recording, mono or stereo, leaving the inherent character of the original source intact. Quite simply Stereoizer will make your audio more coherent, highly polished and spatially balanced without adding artificial reverberation, chorusing or delay.
Stereoplacer 3.0.2 New version! Adjust the position of percussion sounds in a stereo loop, or add stereo positioning to mono samples, placing frequencies exactly where you want them. Stereoplacer gives you control that is simply not available within a traditional mix setup.
Stereoplacer is a fine-tune parametric EQ with the addition of stereo positioning controls. This allows you to tune each band into specific frequencies and move the frequency content around in the stereo sound stage. You can also apply different amounts of cut and boost to the Left and Right channels, or allow Stereoplacer to keep the balance of the original sounds while you choose the position.
Line-up 2.2.4 Line-up is a delay unit, specifically designed to allow rapid and simple sample-accurate delays to be set-up with minimum CPU overhead and screen imprint. Delay time automatically steps through powers of two to allow rapid dial-in of frequently required numbers. Double-click allows direct numerical entry and holding down shift whilst click-dragging steps through in single samples. Although primarily intended as a line up tool for misaligned tracks (no host PDC, phase re-alignment, long mic/speaker recording delay, etc.), Line-up can also be used as a send effect to create very precise chorus,phase and doubling effects.
Все ссылки, размещенные ниже, представлены исключительно для ознакомительного прослушивания или использования и расположены не на нашем сервере. Все файлы лежат на сторонних серверах, к которым сайт promosound.org не имеет никакого отношения. Наш сайт является лишь блогом, на котором пользователи выкладывают ссылки на эти файлы, которые доступны публично. После прослушивания Вы обязаны удалить скачанные файлы и приобрести легальную копию!